Creative Commons License
.

DIY TASER

We live in a society, where crime-rate is increasing day by day. It is not possible to carry a knife or other self defense weapons everywhere at all the time. so here is how you can build your own Electric Taser. and so lets follow this blog to make one for yourself!

Required MATERIAL for DIY TASER!

  • Zap Racket.
  • Screw Driver.
  • Hot Glue Gun.
  • Wire Cutter.
  • Cutter.
  • and so Screws ( 45 mm long).

Obtain the Main Circuitry

So Remove the wire mesh from the circuit carefully. cut the three wires connecting the wire mesh. And So without removing or disturbing any other component, circuit or equipment inside the plastic case of zap racket.

DIY TASER Connections

Cut on of the three wires connecting to wire mesh from which the wire mesh was separated. So Connect those two wires ( + and – ) to the 45mm long screws at flat end ( top ) . So secure the connection with hot glue.

Finishing

Complete the assembly by placing the both ends of nails (i.e. + & – ) to the top of case. maintain a gap of 10 mm between them. Secure this .by the retained screws of plastic casing of zap racket and hot glue.

DIY TASER

so connect with Mission Critical

Twitter – https://twitter.com/AkshayMomaya1

and Instagram – https://www.instagram.com/officialmissioncritical/

and also Facebook – https://www.facebook.com/officialmissioncritical/

Write A Comment

Minov

A Market Place for your Innovations

0